China 2sk-30 Water/Liquid Ring Vacuum Pump Double Stage Stainless Steel Pump with Compressor 55kw, 73HP pulley attachments

Product Description

In depth Pictures

 

Merchandise Description

SK water ring vacuum pump is widely employed in foodstuff processing, mining, pulp, glass business, chemical, pharmaceutical, ceramics, sugar, printing and dyeing, metallurgy and electronics industries. It is employed to pump or compress air and other non-corrosive, insoluble in drinking water, no strong particles, in purchase to sort a vacuum and strain in a shut container, suction gasoline to allow a tiny quantity of liquid mixed.

SK drinking water ring vacuum pump in the functioning method, the fuel compression approach is isothermal, so in the compression and suction explosive gas, it is not easy to happen danger, so its application is far more broadly.

Solution Parameters

one 2 3 four five
end cap The exhaust disk Right after the bracket bearing Rear axle bearing cap
six seven eight 9 ten
axle round nut rear axle housing stuffing box gland Packing gland ring
11 twelve 13 14 fifteen
padding flat important impeller pump physique Suction disc
16 17 eighteen 19 20
Prior to the collar Before the bracket Entrance axle bearing cap flat essential coupling
21        
drinking water inlet        

one 2 three four 5
finish cap Rear intake and exhaust disk impeller bearing bracket round nut
6 7 eight nine 10
Rear axle bearing cap axle bearing rear axle housing Packing gland ring
11 12 thirteen 14 fifteen
padding Packing gland ring flat essential pump body communicating pipe
16 seventeen 18 19 twenty
Entrance suction and exhaust disk Before the collar coupling flat essential round nut
21 22      
Front axle bearing cap water inlet      

 

Model Size Ultimate vacuum Maximum air stream Motor Pace Drinking water use Pump diameter
kpa M3/min KW Rpm L/min mm
SK 1.five 8.three one.five four 1440 15 70
three 3 five.5 1440 twenty 70
six six eleven 1440 30 80
nine 9 15 970 50 eighty
twelve 12 18.five 970 fifty eighty
15 fifteen thirty 730 60 a hundred and fifty
20 twenty 37 730 sixty a hundred and fifty
thirty thirty fifty five 730 100 one hundred fifty
42 forty two 75 730 a hundred thirty 150
2SK 1.5 3.three one.five seven.5 1440 fifteen forty
3 three seven.five 1440 twenty 40
six 6 15 1440 30 70
nine 9 eighteen.five 970 fifty one hundred

Organization Profile

ZheJiang Jiahua Pumps is a manufacturer with numerous a long time of encounter in mining, power technology, dredging, hydraulic, irrigation, slurry transportation, building, seawater, oil and gasoline transportation, solar strength technique and other industries. 

We can provide you with substantial performance and vitality conserving of multistage pump, boiler feed pump, slurry pump, oil pump, self-priming pump, chemical pump, mining pumps, submersible pumps, sewage pumps, sea h2o pumps, photo voltaic pumps, hearth pumps, split case pumps, irrigation pumps and other goods.

Our Merchandise income properly to Europe, The united states, Southeast Asia, Oceania, Center East and Africa far more than ninety nations around the world.

Our goods are widely used in mining, mineral processing, metallurgy, iron and steel, boiler drinking water supply, oil discipline, chemical business, paper generating, water conservancy facilities, sewage remedy, drainage and water source.

We have strong complex pressure, sophisticated manufacturing tests gear, scientific management approaches, steady and reputable top quality products, excellent right after-income services.

We are dedicated to providing the maximum amount of buyer support, aggressive rates, quick supply and thorough, innovative merchandise. Your gratification is our final goal!
 

Operating Residence

Certification

Our Solutions
1. Processing with provided drawing
two. Processing with supplied samples
three. Create all kinds of anti CZPT spare elements other than for pump
4. Product warranty:life time, no issue how prolonged to use,if there is air gap in the movement parts,you should return it,will give you a new 1 to exchange.

Application

Packaging & Shipping

FAQ

1. Q: Whats the MOQ ?
A: 1 established for standard solution ,the particular 1 we require to talk about.
 
2. Q : What're your payments ? 
A: For small get valve < 4000USD, our customer chose 100% T/T.
For purchase valve >4000USD, we can accept thirty % T/T in advance , 70 % need to be compensated ahead of shipment.
 
three . Q : How extended is the supply time ?
A : For the get in stock ,we will supply goods at as soon as against payment.
For the orders out of inventory , the goods time is 7 days for bare pump, 25 days for electric powered pump set or diesel engine pump set , the deliver time is base on the transport date and your order by sea.
 
4. Q: What about the package ?
A : Standard export plywood scenario .
 
five.Q : How is the pump delivered to us ?
A : For urgently get, we can ship by air, for large purchase ,it will be sent by sea ,motor vehicle or multi-modal transport.

 
6. Q : How prolonged is the guarantee ?
A: In accordance to the inter nation standards , pump in common operation is 1 yr ,3 months for spare parts.
 
Any further queries, enable's speak collectively.

 

US $250-8,900
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 24 Hours Online Service
Warranty: 12-24 Months
Max.Head: >150m
Max.Capacity: >400 L/min
Driving Type: Motor
Impeller Number: Double Stage Pump

###

Customization:

###

1 2 3 4 5
end cap The exhaust disk After the bracket bearing Rear axle bearing cap
6 7 8 9 10
axle round nut rear axle housing stuffing box gland Packing gland ring
11 12 13 14 15
padding flat key impeller pump body Suction disc
16 17 18 19 20
Before the collar Before the bracket Front axle bearing cap flat key coupling
21        
water inlet        

###

1 2 3 4 5
end cap Rear intake and exhaust disk impeller bearing bracket round nut
6 7 8 9 10
Rear axle bearing cap axle bearing rear axle housing Packing gland ring
11 12 13 14 15
padding Packing gland ring flat key pump body communicating pipe
16 17 18 19 20
Front suction and exhaust disk Before the collar coupling flat key round nut
21 22      
Front axle bearing cap water inlet      

###

Model Size Ultimate vacuum Maximum air flow Motor Speed Water consumption Pump diameter
kpa M3/min KW Rpm L/min mm
SK 1.5 8.3 1.5 4 1440 15 70
3 3 5.5 1440 20 70
6 6 11 1440 30 80
9 9 15 970 50 80
12 12 18.5 970 50 80
15 15 30 730 60 150
20 20 37 730 60 150
30 30 55 730 100 150
42 42 75 730 130 150
2SK 1.5 3.3 1.5 7.5 1440 15 40
3 3 7.5 1440 20 40
6 6 15 1440 30 70
9 9 18.5 970 50 100
US $250-8,900
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 24 Hours Online Service
Warranty: 12-24 Months
Max.Head: >150m
Max.Capacity: >400 L/min
Driving Type: Motor
Impeller Number: Double Stage Pump

###

Customization:

###

1 2 3 4 5
end cap The exhaust disk After the bracket bearing Rear axle bearing cap
6 7 8 9 10
axle round nut rear axle housing stuffing box gland Packing gland ring
11 12 13 14 15
padding flat key impeller pump body Suction disc
16 17 18 19 20
Before the collar Before the bracket Front axle bearing cap flat key coupling
21        
water inlet        

###

1 2 3 4 5
end cap Rear intake and exhaust disk impeller bearing bracket round nut
6 7 8 9 10
Rear axle bearing cap axle bearing rear axle housing Packing gland ring
11 12 13 14 15
padding Packing gland ring flat key pump body communicating pipe
16 17 18 19 20
Front suction and exhaust disk Before the collar coupling flat key round nut
21 22      
Front axle bearing cap water inlet      

###

Model Size Ultimate vacuum Maximum air flow Motor Speed Water consumption Pump diameter
kpa M3/min KW Rpm L/min mm
SK 1.5 8.3 1.5 4 1440 15 70
3 3 5.5 1440 20 70
6 6 11 1440 30 80
9 9 15 970 50 80
12 12 18.5 970 50 80
15 15 30 730 60 150
20 20 37 730 60 150
30 30 55 730 100 150
42 42 75 730 130 150
2SK 1.5 3.3 1.5 7.5 1440 15 40
3 3 7.5 1440 20 40
6 6 15 1440 30 70
9 9 18.5 970 50 100

Three basic types of pulleys, their applications and ideal mechanical advantages

There are three basic types of pulleys: movable, fixed and compound. Each has its advantages and disadvantages, and you should be able to judge which type is best for your needs by looking at the table below. Once you have mastered the different types of pulleys, you can choose the right pulley for your next project. Now that you have mastered the three basic types, it is time to understand their applications and ideal mechanical advantages.
pulley

describe

The stress characteristics of a pulley depend on its size and construction. These stresses are derived by comparing the stress characteristics of different pulley designs. Stress criteria include static and fatigue strength analyses and specify maximum stress ranges. Stresses are calculated in a 3D stress field, including radial, tangential and axial stresses. The stress characteristics of pulleys are critical to the design and manufacture of industrial machines.
The principal stresses on the pulley shell are distributed in the tangential and hoop directions, close to the centerline of the pulley. If the pulley has a wide face, the axial stress occurring near the shell/disk junction can be large. The stress distribution was determined using British Standard BS5400 Part 10: Stresses at the shell and end disc connections for infinite fatigue life.
Another type of composite is a pulley with a belt section. Such structures are well known in the art. The corresponding help chapters for these elements contain detailed descriptions of the internal structure of these components. Chamfers between pulleys can also be defined using multiple tapers, with a smaller taper extending from midpoint 44 to large diameter 42. Additionally, the pulley can have multiple taper angles, and as the pulley moves away, the taper angle is from the center.

type

A pulley system uses a rope to move the object and one side of the rope to lift the load. The load is attached to one end of the pulley, while the other end can move freely in space. The force applied to the free end of the rope pulls the load up or down. Because of this, the mechanical advantage of the movable pulley is two to one. The greater the force applied to the free end of the rope, the greater the amount of movement achieved.
There are three common types of pulleys. The cast-iron variety has a rim at the front and a hub at the back. The arms of the pulley can be straight or curved. When the arms contract and yield instead of breaking, they are in tension. The top of the pulley centers the belt in motion and is available in widths ranging from 9mm to 300mm.
The rope, hub and axle are mounted on the pulley. They are common and versatile mechanical devices that make it easier to move or lift objects. Some pulleys change the direction of the force. Others change the magnitude. All types of pulleys can be used for a variety of different applications. Here are some examples. If you're not sure which type to choose, you can find more resources online.
pulley

application

The applications for pulleys are almost limitless. This simple machine turns complex tasks into simple ones. They consist of a rope or chain wrapped around a wheel or axle. Using ropes, one can lift heavy objects without the enormous physical exertion of traditional lifting equipment. Some pulleys are equipped with rollers, which greatly magnifies the lifting force.
When used properly, the pulley system can change the direction of the applied force. It provides a mechanical advantage and allows the operator to remain separate from heavy objects. They are also inexpensive, easy to assemble, and require little lubrication after installation. Also, once installed, the pulley system requires little maintenance. They can even be used effortlessly. Despite having many moving parts, pulley systems do not require lubrication, making them a cost-effective alternative to mechanical lifts.
Pulleys are used in many applications including adjustable clotheslines in different machines, kitchen drawers and motor pulleys. Commercial users of pulley systems include cranes. These machines use a pulley system to lift and place heavy objects. They are also used by high-rise building washing companies. They can easily move a building without compromising its structural integrity. As a result, many industries rely on technology to make elevators easier.

Ideal mechanical advantage

The ideal mechanical advantage of a pulley system is the result of rope tension. The load is pulled to the center of the pulley, but the force is evenly distributed over the cable. Two pulleys will provide the mechanical advantage of two pulleys. The total energy used will remain the same. If multiple pulleys are used, friction between pulleys and pulleys reduces the return of energy.
Lever-based machines are simple devices that can work. These include levers, wheels and axles, screws, wedges and ramps. Their ability to work depends on their efficiency and mechanical superiority. The ideal mechanical advantage assumes perfect efficiency, while the actual mechanical advantage takes friction into account. The distance traveled by the load and the force applied are also factors in determining the ideal mechanical advantage of the pulley.
A simple pulley system has an MA of two. The weight attached to one end of the rope is called FA. Force FE and load FL are connected to the other end of the rope. The distance that the lifter pulls the rope must be twice or half the force required to lift the weight. The same goes for side-by-side pulley systems.

Materials used in manufacturing

While aluminum and plastic are the most common materials for making pulleys, there are other materials to choose from for your timing pulleys. Despite their different physical properties, they all offer similar benefits. Aluminum is dense and corrosion-resistant, and plastic is lightweight and durable. Stainless steel is resistant to stains and rust, but is expensive to maintain. For this reason, aluminum is a popular choice for heavy duty pulleys.
Metal can also be used to make pulleys. Aluminum pulleys are lightweight and strong, while other materials are not as durable. CZPT produces aluminium pulleys, but can also produce other materials or special finishes. The list below is just representative of some common materials and finishes. Many different materials are used, so you should discuss the best options for your application with your engineer.
Metals such as steel and aluminum are commonly used to make pulleys. These materials are relatively light and have a low coefficient of friction. Steel pulleys are also more durable than aluminum pulleys. For heavier applications, steel and aluminum are preferred, but consider weight limitations when selecting materials. For example, metal pulleys can be used in electric motors to transmit belt motion.
pulley

cost

Replacing a tensioner in a car's engine can cost anywhere from $90 to $300, depending on the make and model of the car. Cost can also be affected by the complexity of the pulley system and how many pulleys are required. Replacement costs may also increase depending on the severity of the damage. The cost of replacing pulleys also varies from car to car, as different manufacturers use different engines and drivetrains.
Induction motors have been an industrial workhorse for 130 years, but their cost is growing. As energy costs rise and the cost of ownership increases, these motors will only get more expensive. New technologies are now available to increase efficiency, reduce costs and improve safety standards.
The average job cost to replace an idler varies from $125 to $321, including labor. Parts and labor to replace a car pulley can range from $30 to $178. Labor and parts can cost an additional $10 to $40, depending on the make and model of the car. But the labor is worth the money because these pulleys are a critical part of a car's engine.

China 2sk-30 Water/Liquid Ring Vacuum Pump Double Stage Stainless Steel Pump with Compressor 55kw, 73HP     pulley attachments	China 2sk-30 Water/Liquid Ring Vacuum Pump Double Stage Stainless Steel Pump with Compressor 55kw, 73HP     pulley attachments
editor by czh 2022-11-28

Recent Posts